What do Radio and Telecommunications Equipment Installers and Repairers Do

Radio and Telecommunications Equipment Installers and Repairers

Telephones, computers, and radios depend on a variety of equipment to transmit communications signals and connect to the Internet. From electronic and optical switches that route telephone calls and packets of data to their destinations to radio transmitters and receivers that relay signals from radios in airplanes, boats, and emergency vehicles, complex equipment is needed to keep the country communicating. The workers who set up and maintain this sophisticated equipment are called radio and telecommunications equipment installers and repairers.

Telecommunications equipment installers and repairers have a range of skills and abilities, which vary by the type of work they do and where it is performed. Most work indoors.

Central office installers and repairers—telecommunications equipment installers and repairers who work at switching hubs called central offices—do some of the most complex work. Switching hubs contain the switches and routers that direct packets of information to their destinations. Installers and repairers set up those switches and routers, as well as cables and other equipment.

Although most telephone lines connecting houses to central offices and switching stations are still copper, the lines connecting central hubs to each other are fiber optic. Fiber optic lines, along with newer packet switching equipment, have greatly increased the transmission capacity of each line, allowing an ever increasing amount of information to pass through the lines. Switches and routers are used to transmit, process, amplify, and direct a massive amount of information. Installing and maintaining this equipment requires a high level of technical knowledge.

Nonetheless, the increasing reliability of switches and routers has simplified maintenance as new self-monitoring telecommunications switches can now alert central office repairers to malfunctions. Some switches allow repairers to diagnose and correct problems from remote locations. When faced with a malfunction, the repairer may refer to manufacturers' manuals that provide maintenance instructions.

As cable television and telecommunications technology converge, the equipment used in both technologies is becoming more similar. The distribution centers for cable television companies, which are similar to central offices in the telecommunications sector, are called headends. Headend technicians perform essentially the same work as central office technicians, but they work in the cable television industry.

When problems with telecommunications equipment arise, telecommunications equipment repairers diagnose the source of the problem by testing each part of the equipment—a process that requires understanding how the software and hardware interact. To locate the problem, repairers often use spectrum analyzers, network analyzers, or both, to detect any distortion in the signal. To fix the equipment, repairers may use small hand tools, including pliers and screwdrivers, to remove and replace defective components such as circuit boards or wiring. Newer equipment is easier to repair because whole boards and parts are designed to be quickly removed and replaced. Repairers also may install updated software or programs that maintain existing software.

Another type of telecommunications installer and repairer, PBX installers and repairers, set up private branch exchange (PBX) switchboards, which relay incoming, outgoing, and interoffice telephone calls within a single location or organization. To install switches and switchboards, installers first connect the equipment to power lines and communications cables and install frames and supports. They test the connections to ensure that adequate power is available and that the communication links work properly. They also install equipment such as power systems, alarms, and telephone sets. New switches and switchboards are computerized and workers often need to install software or program the equipment to provide specific features. Finally, the installer performs tests to verify that the newly installed equipment functions properly. If a problem arises, PBX repairers determine whether it is located within the PBX system or whether it stems from the telephone lines maintained by the local telephone company. Newer installations may use voice-over Internet protocol (VoIP) systems—systems that operate like PBX, but they use a company's computer wiring to run Internet access, network applications, and telephone communications.

Station installers and repairers, telephone—commonly known as home installers and repairers or telecommunications service technicians—install and repair telecommunications wiring and equipment in customers' home or business premises. They install telephone, VoIP, Internet, and other communications services by installing wiring inside the home or connecting existing wiring to outside service lines. Depending on the service required, they may set up television capability or connect modems and install software on a customer's computer. To complete the connection to an outside service line, the installer may need to climb telephone poles or ladders and test the line. Later on, if a maintenance problem occurs, station repairers test the customer's lines to determine if the problem is located in the customer's premises or in the outside service lines and attempt to fix the problem if it is inside. If the problem is with the outside service lines, telecommunications line repairers usually are called to fix it.

Radio mechanics install and maintain radio transmitting and receiving equipment, excluding cellular communications systems. This includes stationary equipment mounted on transmission towers or tall buildings and mobile equipment, such as two-way radio communications systems in taxis, airplanes, ships, and emergency vehicles. Aviation and marine radio mechanics also may work on other electronic equipment, in addition to radios. Newer radio equipment is self-monitoring and may alert mechanics to potential malfunctions. When malfunctions occur, these mechanics examine equipment for damaged components and either fix them, replace the part, or make a software modification. They may use electrical measuring instruments to monitor signal strength, transmission capacity, interference, and signal delay, as well as hand tools to replace defective components and adjust equipment so that it performs within required specifications.

Work Environment

Telecommunications equipment installers and repairers held about 195,800 jobs in 2020. The largest employers of telecommunications equipment installers and repairers were as follows:

  • Telecommunications - 65%
  • Electrical contractors and other wiring installation contractors - 14%
  • Professional, scientific, and technical services - 3%
  • Merchant wholesalers, durable goods - 3%
  • Cable and other subscription programming - 2%

Some telecom technicians provide in-home installation and repair services, while others work in central offices or electronic service centers. Equipment installation may require climbing onto rooftops and into attics, and climbing ladders and telephone poles.

Telecom technicians occasionally work in cramped, awkward positions, in which they stoop, crouch, crawl, or reach high to do their work. Sometimes they must lift or move heavy equipment and parts. They also may work on equipment while it is powered, so they need to take necessary precautions.

Injuries and Illnesses

The work of telecom technicians can be dangerous. Telecommunications equipment installers and repairers have one of the highest rates of injuries and illnesses of all occupations.

Common injuries include falls and strains.

To reduce risk of injury, workers wear hardhats and harnesses when working on ladders or on elevated equipment. To prevent electrical shocks, technicians may lock off power to equipment that is under repair.

Work Schedules

Most telecom technicians work full time.

Some businesses offer 24-hour repair services. Telecom technicians in these companies work shifts, including evenings, holidays, and weekends. Some are on call around the clock in case of emergencies.

Education & Training Required

As telecommunications technology becomes more complex, the education required for radio and telecommunications equipment installers and repairer jobs has increased. Most employers prefer applicants with postsecondary training in electronics and familiarity with computers. The education needed for these jobs may vary from certification to a 2- or 4-year degree in electronics or a related subject. Sources of training include 2- and 4-year college programs in electronics or communications technology, military experience in radios and electronics, trade schools, and programs offered by equipment and software manufacturers. Educational requirements are higher for central office installers and repairers and for those working in nonresidential settings.

Many in the telecommunications industry work their way up into this occupation by gaining experience at less difficult jobs. Experience as a telecommunications line installer or station installer is helpful before moving up to the job of central office installer and other more complex jobs, for example. Military experience with communications equipment is also valued by many employers in both telecommunications and radio repair.

Newly hired repairers usually receive some training from their employers. This may include formal classroom training in electronics, communications systems, or software and informal hands-on training assisting an experienced repairer. Large companies may send repairers to outside training sessions to learn about new equipment and service procedures. As networks have become more sophisticated—often including equipment from a variety of companies—the knowledge needed for installation and maintenance also has increased.

Certifications Needed

Aviation and marine radio mechanics are required to have a license from the Federal Communications Commission before they can work on these types of radios. This requires passing several exams on radio law, electronics fundamentals, and maintenance practices.

Other Skills Required

Familiarity with computers, being mechanically inclined, and being able to solve problems are traits that are highly regarded by employers. Repairers must also be able to distinguish colors, because wires are typically color-coded. For positions that require climbing poles and towers, workers must be in good physical shape and not afraid of heights. Repairers who handle assignments alone at a customer's site must be able to work without close supervision. For workers who frequently contact customers, a pleasant personality, neat appearance, and good communications skills also are important.

How to Advance

This is an occupation where the technology is changing rapidly. Workers must keep abreast of the latest equipment available and know how to repair it. Telecommunications equipment installers and repairers often need to be certified to perform certain tasks or to work on specific equipment. Certification usually requires taking classes. Some certifications are needed to enter the occupation; others are meant to improve one's current abilities or to advance in the occupation.

The Society of Cable and Telecommunications Engineers and the Telecommunications Industry Association offer certifications to workers in this field. Telecommunications equipment manufacturers also provide training on specific equipment.

Experienced repairers with advanced training may become specialists or troubleshooters who help other repairers diagnose difficult problems, or may work with engineers in designing equipment and developing maintenance procedures. Home installers may advance to wiring computer networks or working as a central office installer and repairer. Because of their familiarity with equipment, repairers are particularly well qualified to become manufacturers' sales workers. Workers with leadership ability also may become maintenance supervisors or service managers. Some experienced workers open their own repair service shops, or become wholesalers or retailers of electronic equipment.

Job Outlook

Employment of telecommunications equipment installers and repairers is projected to show little or no change from 2020 to 2030.

Despite limited employment growth, about 21,500 openings for telecommunications equipment installers and repairers are projected each year, on average, over the decade. Most of those openings are expected to result from the need to replace workers who transfer to different occupations or exit the labor force, such as to retire.

Employment

Employment is projected to decline in telecommunications, the industry that employs most of these workers. Consumers increasingly demand wireless and mobile services, which often require less installation, instead of landline-based services. This shift in demand is expected to limit opportunities for telecommunications equipment installers.

Earnings

The median annual wage for telecommunications equipment installers and repairers was $60,370 in May 2021. The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $36,360, and the highest 10 percent earned more than $82,660.

In May 2021, the median annual wages for telecommunications equipment installers and repairers in the top industries in which they worked were as follows:

  • Telecommunications - $61,070
  • Cable and other subscription programming - $59,910
  • Professional, scientific, and technical services - $53,710
  • Merchant wholesalers, durable goods - $48,950
  • Electrical contractors and other wiring installation contractors - $47,530

Most telecom technicians work full time.

Some businesses offer 24-hour repair services. Telecom technicians in these companies work shifts, including evenings, holidays, and weekends. Some are on call around the clock in case of emergencies.

Academic Programs of Interest


Communication Technician
A Communication Technician Program will teach a student how to install, maintain, remove and repair wiring networks, consumer communication equipment, switchboards and specialized equipment such as intercoms, fax machines, computer networks and electronic key systems. The Communication Technician Program will generally take 4 years to complete. At the end of the program, a technician can expect to understand trade mathematics, basic transmission, fibre optics, and... more
Community Antenna Television Technician
A Community Antenna Television Technician Program will teach a student how to construct, service and maintain a sophisticated two-way interactive broadband communications system designed to deliver superior television and data signals and services to a variety of end users. The program will usually take 4 years to complete. A Community Antenna Television Technician graduate can expect to be well versed in the fundamentals of broadband... more