What do Civil Engineers Do

Civil Engineers

Civil engineers design and supervise the construction of roads, buildings, airports, tunnels, dams, bridges, and water supply and sewage systems. They must consider many factors in the design process from the construction costs and expected lifetime of a project to government regulations and potential environmental hazards such as earthquakes and hurricanes. Civil engineering, considered one of the oldest engineering disciplines, encompasses many specialties. The major ones are structural, water resources, construction, transportation, and geotechnical engineering. Many civil engineers hold supervisory or administrative positions, from supervisor of a construction site to city engineer. Others may work in design, construction, research, and teaching.

Work Environment

Civil engineers held about 309,800 jobs in 2020. The largest employers of civil engineers were as follows:

  • Engineering services - 50%
  • State government, excluding education and hospitals - 12%
  • Local government, excluding education and hospitals - 10%
  • Nonresidential building construction - 6%
  • Federal government, excluding postal service - 3%

Civil engineers work in a variety of locations and conditions. When working on designs, civil engineers may spend most of their time indoors in offices. However, construction engineers may spend much of their time outdoors at construction sites monitoring operations or solving onsite problems. Some jobs may require frequent relocation to different areas and offices in jobsite trailers.

Civil engineers who function as project managers may work from cars or trucks as they move from site to site. Many civil engineers work for government agencies in government office buildings or facilities. Occasionally, civil engineers travel abroad to work on large engineering projects in other countries.

Work Schedules

Civil engineers typically work full time and some work more than 40 hours per week. Engineers who direct projects may need to work extra hours to monitor progress on the projects, to ensure that designs meet requirements, and to guarantee that deadlines are met.

Education & Training Required

A bachelor's degree in engineering is required for almost all entry-level engineering jobs. College graduates with a degree in a natural science or mathematics occasionally may qualify for some engineering jobs, especially in specialties that are in high demand. Most engineering degrees are granted in electrical and electronics engineering, mechanical engineering, and civil engineering. However, engineers trained in one branch may work in related branches. For example, many aerospace engineers have training in mechanical engineering. This flexibility allows employers to meet staffing needs in new technologies and specialties in which engineers may be in short supply. It also allows engineers to shift to fields with better employment prospects or to those which more closely match their interests.

Most engineering programs involve a concentration of study in an engineering specialty, along with courses in both mathematics and the physical and life sciences. Many programs also include courses in general engineering. A design course, sometimes accompanied by a computer or laboratory class or both, is part of the curriculum of most programs. Often, general courses not directly related to engineering, such as those in the social sciences or humanities, also are required.

In addition to the standard engineering degree, many colleges offer 2-year or 4-year degree programs in engineering technology. These programs, which usually include various hands-on laboratory classes that focus on current issues in the application of engineering principles, prepare students for practical design and production work, rather than for jobs that require more theoretical and scientific knowledge. Graduates of 4-year technology programs may get jobs similar to those obtained by graduates with a bachelor's degree in engineering. Engineering technology graduates, however, are not qualified to register as professional engineers under the same terms as graduates with degrees in engineering. Some employers regard technology program graduates as having skills between those of a technician and an engineer.

Graduate training is essential for engineering faculty positions and some research and development programs, but is not required for the majority of entry-level engineering jobs. Many experienced engineers obtain graduate degrees in engineering or business administration to learn new technology and broaden their education. Numerous high-level executives in government and industry began their careers as engineers.

The Accreditation Board for Engineering and Technology (ABET) accredits college and university programs in engineering and engineering technology. ABET accreditation is based on a program's faculty, curriculum, and facilities; the achievement of a program's students; program improvements; and institutional commitment to specific principles of quality and ethics. Graduation from an ABET-accredited program may be required for engineers who need to be licensed.

Although most institutions offer programs in the major branches of engineering, only a few offer programs in the smaller specialties. Also, programs with the same title may vary in content. For example, some programs emphasize industrial practices, preparing students for a job in industry, whereas others are more theoretical and are designed to prepare students for graduate work. Therefore, students should investigate curricula and check accreditations carefully before selecting a college.

Admissions requirements for undergraduate engineering schools include a solid background in mathematics (algebra, geometry, trigonometry, and calculus) and science (biology, chemistry, and physics), in addition to courses in English, social studies, and humanities. Bachelor's degree programs in engineering typically are designed to last 4 years, but many students find that it takes between 4 and 5 years to complete their studies. In a typical 4-year college curriculum, the first 2 years are spent studying mathematics, basic sciences, introductory engineering, humanities, and social sciences. In the last 2 years, most courses are in engineering, usually with a concentration in one specialty. Some programs offer a general engineering curriculum; students then specialize on the job or in graduate school.

Some engineering schools have agreements with 2-year colleges whereby the college provides the initial engineering education and the engineering school automatically admits students for their last 2 years. In addition, a few engineering schools have arrangements that allow students who spend 3 years in a liberal arts college studying preengineering subjects and 2 years in an engineering school studying core subjects to receive a bachelor's degree from each school. Some colleges and universities offer 5-year master's degree programs. Some 5-year or even 6-year cooperative plans combine classroom study with practical work, permitting students to gain valuable experience and to finance part of their education.

Certifications Needed

All 50 States and the District of Columbia require licensure for engineers who offer their services directly to the public. Engineers who are licensed are called professional engineers (PEs). This licensure generally requires a degree from an ABET-accredited engineering program, 4 years of relevant work experience, and completion of a State examination. Recent graduates can start the licensing process by taking the examination in two stages. The initial Fundamentals of Engineering (FE) examination can be taken upon graduation. Engineers who pass this examination commonly are called engineers in training (EITs) or engineer interns (EIs). After acquiring suitable work experience, EITs can take the second examination, called the Principles and Practice of Engineering exam. Several States have imposed mandatory continuing education requirements for relicensure. Most States recognize licensure from other States, provided that the manner in which the initial license was obtained meets or exceeds their own licensure requirements. Many civil, mechanical, and chemical engineers are licensed PEs. Independently of licensure, various certification programs are offered by professional organizations to demonstrate competency in specific fields of engineering.

Other Skills Required

Engineers should be creative, inquisitive, analytical, and detail oriented. They should be able to work as part of a team and to communicate well, both orally and in writing. Communication abilities are becoming increasingly important as engineers interact more frequently with specialists in a wide range of fields outside engineering.

Engineers who work for the Federal Government usually must be U.S. citizens. Some engineers, particularly nuclear engineers and aerospace and other engineers working for defense contractors, may need to hold a security clearance.

How to Advance

Beginning engineering graduates usually work under the supervision of experienced engineers and, in large companies, also may receive formal classroom or seminar-type training. As new engineers gain knowledge and experience, they are assigned more difficult projects with greater independence to develop designs, solve problems, and make decisions. Engineers may advance to become technical specialists or to supervise a staff or team of engineers and technicians. Some eventually may become engineering managers or enter other managerial or sales jobs. In sales, an engineering background enables them to discuss a product's technical aspects and assist in product planning, installation, and use.

Numerous professional certifications for engineers exist and may be beneficial for advancement to senior technical or managerial positions. Many certification programs are offered by the professional societies listed as sources of additional information for engineering specialties at the end of this statement.

Job Outlook

Employment of civil engineers is projected to grow 8 percent from 2020 to 2030, about as fast as the average for all occupations.

About 25,000 openings for civil engineers are projected each year, on average, over the decade. Many of those openings are expected to result from the need to replace workers who transfer to different occupations or exit the labor force, such as to retire.

Employment

As current U.S. infrastructure experiences growing obsolescence, civil engineers will be needed to manage projects to rebuild, repair, and upgrade bridges, roads, levees, dams, airports, buildings, and other structures.

A growing population likely means that new water systems will be required while, at the same time, aging, existing water systems must be maintained to reduce or eliminate leaks. In addition, more waste treatment plants will be needed to help clean the nation’s waterways. Civil engineers will continue to play a key part in all of this work.

The work of civil engineers will be needed for renewable-energy projects. Thus, as these new projects gain approval, civil engineers will be further involved in overseeing the construction of structures such as wind farms and solar arrays.

Although state and local governments continue to face financial challenges and may have difficulty funding all projects, some delayed projects will have to be completed to build and maintain critical infrastructure, as well as to protect the public and the environment.

Earnings

The median annual wage for civil engineers was $88,050 in May 2021. The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $60,550, and the highest 10 percent earned more than $133,320.

In May 2021, the median annual wages for civil engineers in the top industries in which they worked were as follows:

  • Federal government, excluding postal service - $100,730
  • Local government, excluding education and hospitals - $99,330
  • Engineering services - $93,520
  • State government, excluding education and hospitals - $83,390
  • Nonresidential building construction - $77,450

Civil engineers typically work full time and some work more than 40 hours per week. Engineers who direct projects may need to work extra hours in order to monitor progress on projects, to ensure that designs meet requirements, and to guarantee that deadlines are met.

Academic Programs of Interest


Acoustical Engineering
Acoustical engineering is the branch of engineering dealing with sound and vibration. It is closely related to acoustics, the science of sound and vibration. Acoustical engineers are typically concerned with: 1.How to reduce unwanted sounds 2.How to make useful sounds 3.Using sound as an indication of some other physical property more
Architectural Engineering
An architectural engineer applies the skills of many engineering disciplines to the design, construction, operation, maintenance, and renovation of buildings while paying attention to their impacts on the surrounding environment. In countries such as Canada, it is more commonly known as building engineering; often "building systems engineering" or "building services engineering" are similar to some architectural engineering specializations. more
Civil Engineering
Civil engineering is a professional engineering discipline that deals with the design and construction of the physical and natural built environment, including works such as bridges, roads, canals, dams and buildings. It is traditionally broken into several sub-disciplines including municipal engineering, environmental engineering, geotechnical engineering, structural engineering, transportation engineering, water resources engineering, materials engineering, coastal engineering, surveying, urban planning, and construction engineering. Civil engineers typically... more
Engineering Physics
Engineering physics is an academic degree, available mainly at the levels of B.Sc., M.Sc. and Ph.D. Unlike other engineering degrees (such as aerospace engineering or electrical engineering), Engineering physics does not necessarily include a particular branch of science or physics. Instead, Engineering physics is meant to provide a more thorough grounding in applied physics of any area chosen by the student (such as optics, nanotechnology,... more
Textile Engineering
Textile engineering (TE) or textile technology deals with the application of scientific and engineering principles to the design and control of all aspects of fiber, textile, and apparel processes, products, and machinery. These include natural and man-made materials, interaction of materials with machines, safety and health, energy conservation, and waste and pollution control. Additionally, textile engineers are given training and experience in plant design and... more